LESDL wrote:
>
>
> Does the SE 6200 ignition module continue to take the cam position
> sensor into the equation? Or is it like the newer 2001 stock module?
>
> When put onto a '99 Dyna, fwiw.
> --
>
> LESDL
> Asshole(tm)#74 BS 24
>
Depends on the part number of the module.
Also keep in mind that there are three different versions of the 6200 rpm
modules.
The only modules that do -not- use the cam sensor signal afaik, are
the ones that end in -01 suffix..
It strikes me as being odd that the street legal (no retard) version has two
models that end
in -99a and -00 and they are listed to fit the cam-sensorless bikes.
--
HogDr SENS BS#123
---------------------------------------------------------------
HD Dealer Technician at your service......
My Employer's site: http://www.wishd.com
My site: http://www.execpc.com/~patrickz/patricksite.htm
---------------------------------------------------------------
This archive was generated by hypermail 2b30 : Thu Mar 01 2001 - 17:09:25 CST