Bob wrote:
>
>
> The pipes are slash cut and inside there is a baffle in the center- a
> single pipe with baffles in the complete circumference, with the typical
> baffle cuts all around.
That sounds like the usual Samson baffle setup, a straight thru tube with
scallops in
the walls of the tube? Does it have a bolt on end, or one piece?
--
HogDr SENS BS#123
---------------------------------------------------------------
HD Dealer Technician at your service......
My Employer's site: http://www.wishd.com
My site: http://www.execpc.com/~patrickz/patricksite.htm
---------------------------------------------------------------
This archive was generated by hypermail 2b30 : Thu Mar 01 2001 - 17:09:24 CST