John Eiland wrote:
>
> Now if installing the PCII just turns out to be as easy....hehehehe
Piece of carrot cake.
You'll find it easier to disengage the cruise cable from the module, it's just a
twist lock.
Transfer the rubber boot from the stock harness to the PC harness so it stays
with the ECM,
it's easy for water to get into the ECM without the boot in place, it's very
important.
You can velcro the PC to the outside of the cruise module, it'll clear the cover
no problem.
--
HogDr SENS BS#123
---------------------------------------------------------------
HD Dealer Technician at your service......
My Employer's site: http://www.wishd.com
My site: http://www.execpc.com/~patrickz/patricksite.htm
---------------------------------------------------------------
This archive was generated by hypermail 2b30 : Thu Mar 01 2001 - 17:09:24 CST