Chuck Lanter wrote:
>
> >
> >I put the #3348 oil temp gauge in my fairing, the sensor screwed right into my
> >twin cam
> >oil tank.
>
> Patrick, I assume you just screwed it into the extra port on the
> side of the oil pan? (The allen plug)
Yeah, the allen plug screws in from the front of the pan, the sender comes with an
adapter,
and it screws in flush to the end of the adapter, so it doesn't protrude into the
galley
any deeper than the original plug. Very clean install. My harness is wired for the
oil pressure
gauge, but I only have the light, so I used the extra wire for this.
--
HogDr SENS BS#123
---------------------------------------------------------------
HD Dealer Technician at your service......
My Employer's site: http://www.wishd.com
My site: http://www.execpc.com/~patrickz/patricksite.htm
---------------------------------------------------------------
This archive was generated by hypermail 2b30 : Thu Mar 01 2001 - 17:09:23 CST