fxstc89@my-deja.com wrote:
> Could someone please list the special tools needed for cam removal and
> replacement for a stock BT Evo 1340? Also, do independents carry these
> tools or do you have to order them from Jim's etc?
>
Hmm. A lift is helpful.
Small boltcutters.
Magnetic lifter holders (hold from the top) (or two heavy paperclips bent
with hooks on the ends)
Cam cover puller/seal installer.
Inner cam bearing puller.
Inner cam bearing installer.
Depth micrometer.
Dial caliper.
5 ton press.
Lathe with a small boring bar.
Tappet block alignment tool (if you're replacing the lifters)
Curved duckbill pliers.
Four wooden clothespins.
Crane lifter clamps (holds lifters up from inside the cam chest while
installing the cam)
That's pretty much just from walking through the process in my head.
You might find a shop that rents out tools, or order them from various
sources. Jims is the best quality.
--
HogDr SENS BS#123
---------------------------------------------------------------
HD Dealer Technician at your service......
My Employer's site: http://www.wishd.com
My site: http://www.execpc.com/~patrickz/patricksite.htm
---------------------------------------------------------------
This archive was generated by hypermail 2b30 : Thu Mar 01 2001 - 17:09:23 CST