Chuck Davis wrote:
> Yogi,
>
> Before I did in the front end of my 99fxdwg I was told that the axle size
> between the 200 and pre 2000 was different and they wouldn't fit. After I
> customized the front end on a curb (hit gravel in a turn, went down and scoot
> slid into a curb) I had the entire front end replaced with a 2000 setup. I now
> have the sealed bearings, bigger axle and 4-piston calipers. I've also heard
> that someone makes a special axle that allows the use of the newer wheels with
> the older forks but I can't remember who makes it.
>
The only axle that was enlarged was the front axle on the baggers, and that was
only
on the right side. All others still have the same diameter axles.
--
HogDr SENS BS#123
---------------------------------------------------------------
HD Dealer Technician at your service......
My Employer's site: http://www.wishd.com
My site: http://www.execpc.com/~patrickz/patricksite.htm
---------------------------------------------------------------
This archive was generated by hypermail 2b30 : Thu Mar 01 2001 - 17:09:21 CST