Curtis Fesler wrote:
> I am looking for performance on the low end for a Geezer Glide,
>
Depends on your future plans for the motor.
If you have no intention of enlarging the displacement, then JM-20 will
extract some very strong low end torque.
If you intend to go big bore sometime in the future, then andrews tw-37B would
be my suggestion, or just leave the stock cams alone and put the big bore
cylinders
on with flat-top pistons.
Any way you go will take a different ignition module to ward off pinging because
of the
higher compression.
HogDr
--
---------------------------------------------------------------
Support Breast Cancer Research and you might win a '01 FLSTS!
Raffle tickets @ $5 a chance, ping me private for info
HD Dealer Technician at your service......
My Employer's site: http://www.mycyberweb.com/wishd (java required)
My site: http://www.execpc.com/~patrickz/patricksite.htm
---------------------------------------------------------------
This archive was generated by hypermail 2b30 : Thu Mar 01 2001 - 17:09:17 CST