Jake Rakestraw wrote:
>
>
> I need some expert advice on where to set this mixture screw. I have heard
> from several people to turn it all the way in, careful not to go too far,
> could damage the backplate.
The mixture screw is your friend, once you master it.
The general idea is to first adjust it however and wherever you need to get the
highest
idle RPM, then adjust the idle speed back to 950 or so. Then turn the screw in
-very- slowly
until you hear the idle speed start to drop, then back it out just enough to
pick that rpm back
up to where it was. That's it, you're done.
HogDr
--
---------------------------------------------------------------
Support Breast Cancer Research and you might win a '01 FLSTS!
Raffle tickets @ $5 a chance, ping me private for info
HD Dealer Technician at your service......
My Employer's site: http://www.wishd.com (need Javascript on)
My site: http://www.execpc.com/~patrickz/patricksite.htm
---------------------------------------------------------------
This archive was generated by hypermail 2b30 : Thu Mar 01 2001 - 17:09:16 CST