Steven Banks wrote:
>
> >
> > I have a 2'x3' piece of thick glass and big sheets of sandpaper, I use for
> > sanding the bottoms
> > of the rockerboxes flat. I use the cheap harley gaskets and they hold up
> > fine, I think
> > they finally found a good material for the gasket. Might want to give
> > them another shot at it.
>
> Hi HogDoc,
>
> What coarseness are you using for the sandpaper? And are you using just one
> grade... or doing a few steps by going finer?
>
> Thanks,
> Steve
Not sure of the grade, maybe 200 grit or so, a good biting open coat paper for
ripping
through chrome. It's been fine for evo's and the fiber gaskets, but the TC's I
take a final
pass on 500 grit as the rubber gasket is a bit less forgiving.
HogDr
--
---------------------------------------------------------------
Support Breast Cancer Research and you might win a '01 FLSTS!
Raffle tickets @ $5 a chance, ping me private for info
HD Dealer Technician at your service......
My Employer's site: http://www.wishd.com (need Javascript on)
My site: http://www.execpc.com/~patrickz/patricksite.htm
---------------------------------------------------------------
This archive was generated by hypermail 2b30 : Thu Mar 01 2001 - 17:09:09 CST