CBrownSJBW wrote:
> Plastic's out and the bottle's open. I lowered my '99 Road King to give my 29"
> legs a break. However, I then had to lean the bike past center to the right in
> order to put the jiffy stand up. Not fun in gravel etc... Anyway I picked up
> one of those wedges that go between the frame and stand bracket. That helped
> alot, and brought the lean angle back where it should be. Now the problem...
> the tip of the stand (last 1/4") is now hitting the primary case. I could
> grind/cut it off, but then I would need to re-chrome it. Don't mind the cost,
> but I don't want my bike on a lift for 2-3 weeks while it's out at the chrome
> shop. Another option is to buy a new stand, modify it, chrome it, and throw
> the other one away. I have seen stands for lowered Softies, but not the RK.
> Any other suggestions?
>
> Possum
> '99 FLHR
Make sure your jiffystand bumper is located so that it contacts the point of the
kickstand that pushes it out the furthest. If that's not enough, I'm fairly
certain that the
bumper for the Dyna is longer, pick one up and glue it to the frame in the
appropriate
place.
HogDr
--
---------------------------------------------------------------
Remove *nospam* to reply
HD Dealer Technician at your service......
My Employer's site: http://www.wishd.com (need Javascript on)
My site: http://www.execpc.com/~patrickz/patricksite.htm
---------------------------------------------------------------
This archive was generated by hypermail 2b30 : Thu Mar 01 2001 - 17:09:08 CST