T Copeland wrote:
> HogDoctor <hog.doctor@exec.pc.com> wrote:
>
> >The SE-4 or EV-27 with a compression bump to 9.5:1, or better yet the SE heads
> >if you
> >can swing it, will yield a lot of midrange boost. Proven package.
>
> How much would need to be shaved off the heads to get to the 9.5:1
> comp. ratio?
>
> T.Copeland
> 96 FXDS-Conv
I would recommend measuring the chambers first to be sure, but I would guess
about .065". Shave some off the cylinders first to get the squish band down
to about .040" ( typically it comes out to .015" off the cylinders and .050" off
the
heads, but again, measure the deck height and do the math before doing any cutting)
HogDr
--
---------------------------------------------------------------
Remove *nospam* to reply
HD Dealer Technician at your service......
My Employer's site: http://www.wishd.com (need Javascript on)
My site: http://www.execpc.com/~patrickz/patricksite.htm
---------------------------------------------------------------
This archive was generated by hypermail 2b30 : Thu Mar 01 2001 - 17:09:04 CST