lukam wrote:
> Hi Patrick, order what you need, your on my tab. I have a 2000
> FXD with HD slip-ons, 48 slow jet, idle mix adjusted by the lean
> drop method, and .040 rise in the needle. The bike has been
> running great, but yesterday I noticed what seemed to be a brief
> knocking every once and awhile going through the gears. It
> seemed to occur mainly in low gears and at fairly low rpm. I
> always put in the best gas I can get, 91 octane here in Denver.
> I did a search on the subject and have seen posts on putting in
> a SE 6200 module and coil. Will this help? Could it be
> something else? Or should I even worry about it? I don't mind
> putting on the module and coil but at 200 bucks if there is a
> cheaper fix I would do it since I am happy with the bike as is.
>
> P.S. There are several SE modules and coils in the catalog, I
> would probably use the one for street-legal applications, would
> this do the trick?
Wow, you're a mile high and using a 48 pilot? You got non-oem cams in there?
You can still experience some knocking (detonation, pinging, whatever you want
to call it)
if you load the engine at too low of an rpm, especially when the engine is
really running hot.
You might have to take the step to the 6200 module and coil. (the cross flagged
one)
AFAIK, the street legal one is the same as stock with a higher rev limit.
HogDr.
--
---------------------------------------------------------------
Remove *nospam* to reply
HD Dealer Technician at your service......
My Employer's site: http://www.wishd.com (need Javascript on)
My site: http://www.execpc.com/~patrickz/patricksite.htm
---------------------------------------------------------------
This archive was generated by hypermail 2b30 : Thu Mar 01 2001 - 17:09:03 CST