dpsper@webtv.net wrote:
> I got a leak from the starter jackshaft seal on my '92 Softail Custom.
> Does anybody know if the clutch needs to come off, to get the starter
> gear off, to pull the starter out, to replace that seal?
> thanks in advance.
The clutch hub will be in the way of the sleeve, you should be able to
leave the comp
nut intact, just remove the clutch hub nut, and slide the hub away from
the primary, and
pull the jackshaft guts out.
You -are- totally sure it's not the mainshaft seal or pulley that's
leaking?
It's not that much further to just yank the inner primary and reseal
everything.
(I just -hate- doing things twice, that's all)
HogDr
--
---------------------------------------------------------------
Remove *nospam* to reply
HD Dealer Technician at your service......
My Employer's site: http://www.wishd.com (need Javascript on)
My site: http://www.execpc.com/~patrickz/patricksite.htm
---------------------------------------------------------------
This archive was generated by hypermail 2b30 : Thu Mar 01 2001 - 17:09:03 CST