dwight wrote:
> I think he has the TC88 engine and please correct me if I'm wrong but the
> Torrington B138 was the outer cam bearing for the EVO's and will not work in
> the TC88.
> I have been told by several wrenches that Torrington does not make a outer
> cam bearing for the TC88. They do make an inner cam bearing and it is B148 .
> HD has come out with an improved roller bearing for the rear camshaft on the
> TC88 but it must be used with the splined cams. 99 TC88 owners have keyed
> cams as stock.
Update... I installed a set of andrews keyed cams in a 00 dyna and used the
roller cam bearing. If you already have the roller bearing stock, then you
will have an
extra thrust washer for the other side of the bearing. It works just fine.
HogDr
---------------------------------------------------------------
Remove *nospam* to reply
HD Dealer Technician at your service......
My Employer's site: http://www.wishd.com (need Javascript on)
My site: http://www.execpc.com/~patrickz/patricksite.htm
---------------------------------------------------------------
This archive was generated by hypermail 2b30 : Thu Mar 01 2001 - 17:09:02 CST